Subaru Forester: Seat, seatbelt and SRS airbags / Seat
- Safety tips
- Manual seat (if equipped)
- Power seat (if equipped)
- Memory function (driver’s seat – if equipped)
- Registration of memory position with button “1” or “2”
- Registration of the reverse tiltdown mirror angle with button “1” or “2”
- Registration of memory position with a key fob
- Registration of the reverse tiltdown mirror angle with the key fob
- Retrieval of memory position registered with button “1” or “2”
- Retrieval of the memory position registered with access key fob
- Clearing the registered seat position with access key fob
Safety tips
WARNING
Never adjust the seat while driving,
as personal injury or loss of
vehicle control may occur.
Before adjusting the seat, ensure
nothing is blocking the adjusting
mechanism...
Other information:
Subaru Forester 2019-2026 Owners Manual: Uniform tire quality grading standards
This information indicates the relative performance of passenger car tires in the area of treadwear, traction, and temperature resistance. This is to aid the consumer in making an informed choice in the purchase of tires. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width...
Subaru Forester 2019-2026 Owners Manual: Safety precautions
CAUTION Do not let dust, oil or water get on or in the access key fob/transmitter when replacing the battery. Before replacing the battery, remove any static electricity. Be careful not to touch or damage the printed circuit board in the access key fob/transmitter when replacing the battery...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- All-Wheel Drive warning light
- To activate/deactivate the X-MODE
- If the passenger’s frontal airbag OFF indicator illuminates and the ON indicator turns off even when the front passenger’s seat is occupied by an adult
- New on site
- Most important about car
Average vehicle speed
This display shows the average vehicle speed since the trip meter was last reset. Pressing the TRIP RESET switch toggles the display between the average vehicle speed corresponding to the A trip meter display and the average vehicle speed corresponding to the B trip meter display. When either of the trip meter displays is reset, the corresponding average vehicle speed value is also reset.
Copyright © 2026 www.suforester5.com