Subaru Forester: Keys and doors / Immobilizer
The immobilizer system is designed to
prevent an unauthorized person from
starting the engine. Only keys registered
with your vehicle’s immobilizer system can
be used to operate your vehicle. If engine
start is attempted with an unregistered
access key fob or key, the engine will not
start. Even if the engine does start, it will
stop after a few seconds. This system,
however, is not a 100% anti-theft guarantee.
CAUTION
- Do not place the key under direct
sunlight or anywhere it may become
hot.
- Do not get the key wet. If the key
gets wet, wipe it dry with a cloth
immediately.
- Do not modify or remove the
system. If modified or removed,
the proper operation of the system
cannot be guaranteed.
NOTE
- To protect your vehicle from theft,
please pay close attention to the following
security precautions:
- Never leave your vehicle unattended
with its keys inside.
- Before leaving your vehicle,
close all windows and the moonroof,
and lock the doors and rear
gate.
- Do not leave spare keys or any
record of your key number in the
vehicle.
- The vehicle has a maintenance-free
type immobilizer system.
Your key number plate will be required if
you ever need a replacement key made.
Any new key must be registered for use
with your vehicle’s immobilizer system
before it can be used...
Other information:
Reverse Automatic Braking (RAB) is a
system designed to help avoid collisions or
reduce collision damage when reversing
the vehicle. If a wall or an obstacle is
detected in the reversing direction, the
system will notify the driver with a warning
sound and may activate the vehicle’s
brakes automatically...
When the procedure to disable the functions
is performed again, a chirp will
sound, and the functions are enabled.
NOTE
The keyless access function will be
enabled only if you perform the procedure
in the same manner used to
disable the function (for example, when
disabling by operating the driver’s
door, the function will not be enabled
even if you operate the access key fob)...
Categories
The outside temperature is displayed on
the multi-function display (color LCD).
NOTE
The outside temperature indicator
shows the temperature around the
sensor. However, the temperature may
not be indicated correctly or the update
may be delayed in the following conditions.
While parking or driving at low
speeds
When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
When starting the engine after
being parked for a certain period of
time
The temperature unit cannot be
changed.
read more