Subaru Forester 2019-2025 Owners Manual / Seat, seatbelt and SRS airbags / Seat / Registration of memory position with a key fob

Subaru Forester: Seat / Registration of memory position with a key fob

Adjust the seat position under the following conditions.
- The parking brake is applied.
- The ignition switch is in the “LOCK”/ “OFF” position.
- The select lever is in the “P” position.
Hold the access key fob and press and hold the “SET” button, then press the button of the access key fob.
A chirp will sound once, and the seat position is registered.

NOTE

When registering the seat position, carry the access key that you want to register with you. If you are carrying 2 or more access keys, registration may not be possible.

Registration of the reverse tiltdown mirror angle with button “1” or “2”

C..

Registration of the reverse tiltdown mirror angle with the key fob

CAUTION Depress the brake pedal when registering the reverse tilt-down mirror angle. Move the select lever to the “R” position, then the outside mirror angle will move to the reverse tilt-down position...

Other information:

Subaru Forester 2019-2025 Owners Manual: Automatic climate control operation

When this mode is selected, the fan speed, airflow distribution, air-inlet control, and air conditioner compressor operation are automatically controlled. To activate this mode, perform the following. NOTE Operate the automatic climate control system when the engine is running...

Subaru Forester 2019-2025 Owners Manual: After the vehicle is stopped by the system

RAB OFF indicator After the brake pedal is depressed, the RAB OFF indicator will illuminate and the system will temporarily stop operating. The RAB OFF indicator will turn off when the select lever is shifted to a position other than the “R” position...

Outside temperature indicator

The outside temperature is displayed on the multi-function display (color LCD).

NOTE

The outside temperature indicator shows the temperature around the sensor. However, the temperature may not be indicated correctly or the update may be delayed in the following conditions. While parking or driving at low speeds When the outside temperature changes suddenly (example: when going in and out of an underground parking area or when passing through a tunnel) When starting the engine after being parked for a certain period of time The temperature unit cannot be changed.