Subaru Forester 2019-2026 Owners Manual / Seat, seatbelt and SRS airbags / Seat / Manual seat (if equipped) / Reclining the seatback

Subaru Forester: Manual seat (if equipped) / Reclining the seatback

Subaru Forester. Reclining the seatback

Pull the reclining lever up and adjust the seatback to the desired position. Then release the lever and make sure the seatback is securely locked into place. The seatback placed in a reclined position can spring back upward with force when the lever is pulled. When operating the lever to return the seatback, hold the seatback lightly so that it may be raised back gradually.

Forward and backward adjustment

Seat height adjustment (driver’s seat)

When the lever is pushed down, the seat is lowered. When the lever is pulled up, the seat rises. The height of the seat can be adjusted by moving the seat adjustment lever up and down...

Other information:

Subaru Forester 2019-2026 Owners Manual: Wiper operation when snowing

Before driving in cold weather, make sure the wiper blade rubbers are not frozen to the windshield or rear window. If the wiper blade rubbers are frozen to the windshield or rear window, perform the following procedure. To thaw the windshield wiper blade rubbers, use the defroster with the airflow selection in and the temperature set for maximum warmth until the wiper blade rubbers are completely thawed...

Subaru Forester 2019-2026 Owners Manual: If the front passenger’s frontal airbag ON indicator illuminates and the OFF indicator turns off even when an infant or a small child is in a child restraint system (including booster seat)

Front passenger’s frontal airbag ON indicator Front passenger’s frontal airbag OFF indicator Turn the ignition switch to the “LOCK”/ “OFF” position. Remove the child restraint system from the seat. By referring to the child restraint manufacturer’s recommendations as well as the child restraint system installation procedures in “Child restraint systems, correctly install the child restraint system...

Driving information display

NOTE

You can set the units for both the multifunction display (black and white) and the combination meter at the same time. For details about setting the language and units, refer to “Type A combination meter” or “Menu screens”.