Subaru Forester 2019-2026 Owners Manual / Keys and doors / Door locks
Subaru Forester: Keys and doors / Door locks
- Locking and unlocking from the outside
- Locking and unlocking from the inside
- Automatic door locking/unlocking
- Key lock-in prevention function
- Battery drainage prevention function
Locking and unlocking from the outside
NOTE
If you unlock the driver’s door with a
key (including an emergency key) and
open the door while the alarm system is
armed, the alarm system is triggered
and the vehicle’s horn sounds...
Other information:
Subaru Forester 2019-2026 Owners Manual: How to temporarily lower the sensitivity of the high beam assist function
The sensitivity of the high beam assist function can be lowered by performing the following operations. Before turning the ignition switch to the “ON” position, set the light control switch to the “AUTO” position and push the signal lever forward (high beam position)...
Subaru Forester 2019-2026 Owners Manual: Trailer towing tips
CAUTION For models equipped with the BSD (Blind Spot Detection) and RCTA (Rear Cross Traffic Alert) driving support systems, when towing a trailer, press the BSD/ RCTA OFF switch to deactivate the system. The system may not operate properly due to the blocked radar waves...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- All-Wheel Drive warning light
- How to use the high beam assist function
- Daytime running light system
- New on site
- Most important about car
Average vehicle speed
This display shows the average vehicle speed since the trip meter was last reset. Pressing the TRIP RESET switch toggles the display between the average vehicle speed corresponding to the A trip meter display and the average vehicle speed corresponding to the B trip meter display. When either of the trip meter displays is reset, the corresponding average vehicle speed value is also reset.
Copyright © 2026 www.suforester5.com