Subaru Forester 2019-2024 Owners Manual / Consumer information and reporting safety defects
Subaru Forester: Consumer information and reporting safety defects
For U.S.A.
The following information has been compiled according to Code of Federal Regulations “Title 49, Part 575”.
- Tire information
- Tire labeling
- Recommended tire inflation pressure
- Glossary of tire terminology
- Tire care – maintenance and safety practices
- Determining compatibility of tire and vehicle load capacities
- Adverse safety consequences of overloading on handling and stopping and on tires
- Steps for Determining Correct Load Limit
- Vehicle load limit – how to determine
- Uniform tire quality grading standards
- Reporting safety defects (U.S.A.)
- How to contact Transport Canada in order to report a safety concern relating to the vehicle (Canada)
Vehicle identification
Vehicle identification number (under the floor carpet of the righ..
Other information:
Subaru Forester 2019-2024 Owners Manual: Charge warning light
If this light illuminates when the engine is running, it may indicate that the charging system is not working properly. If the light illuminates while driving or does not turn off after the engine starts, stop the engine at the first safe opportunity and check the alternator belt...
Subaru Forester 2019-2024 Owners Manual: Shift lock release using the shift lock release button
Perform the following procedure to release the shift lock. Apply the parking brake and stop the engine. Wrap the tip of a flat-head screwdriver with vinyl tape or a cloth and use it to remove the shift lock cover. The shift lock release button is located under the shift lock cover...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- How to use the high beam assist function
- Power steering warning light
- If the passenger’s frontal airbag OFF indicator illuminates and the ON indicator turns off even when the front passenger’s seat is occupied by an adult
- New on site
- Most important about car
Type B multi-function display (color LCD)
Turn the ignition switch to “ON”.
button.
Select “Settings”.
Select “Vehicle”.
Select “Time/Date” and then select “Manual”.
to complete the
clock
setting.
Copyright © 2024 www.suforester5.com