Subaru Forester: Warning and indicator / BSD/RCTA warning light (if equipped)

This warning indicator appears when the
BSD/RCTA is malfunctioning. In this case
the BSD/RCTA warning light will be shown
on the combination meter display (color
LCD). When this indicator appears, have
your vehicle inspected by your SUBARU
dealer as soon as possible.
BSD/RCTA OFF indicator light

The indicator appears when the BSD/
RCTA OFF switch is pressed to deactivate
the BSD/RCTA or when the BSD/RCTA is
suspended temporarily. In this case the
BSD/RCTA OFF indicator light will be
shown on the combination meter display
(color LCD). For details, refer to “BSD/RCTA”.
X-MODE indicator light (if equipped)
Type A combination meter
X-MODE indicator
Type B combination meter
X-MODE indicator (models with 1 mode)
X-MODE indicator (models with 2 modes)
X-MODE indicator or D.SNOW/MUD mode indicator
SNOW/DIRT mode indicator
This indicator appears while the X-MODE
..
This indicator illuminates if the Reverse
Automatic Braking (RAB) system malfunctions.
Refer to “Reverse Automatic Braking
(RAB) system”.
RAB OFF indicator light
This indicator illuminates when the Reverse
Automatic Braking (RAB) system is
turned OFF, or when the Reverse Automatic
Brakin..
Other information:
The high beam assist function will be
activated when all the following conditions
are met.
The light control switch is in the “AUTO”
position and the low beam headlights are
on automatically.
The turn signal lever is pushed forward.
High beam assist indicator light
When the high beam assist function is
activated, the high beam assist indicator
light on the combination meter will illuminate...
Chemicals, salts and gravel used for
deicing road surfaces are extremely corrosive,
accelerating the corrosion of underbody
components, such as the exhaust
system, fuel and brake lines, brake cables,
floor pan and fenders, and suspension.
Thoroughly flush the underbody and inside
of the fenders with lukewarm or cold water
at frequent intervals to reduce the harmful
effects of such agents...