Subaru Forester: Moonroof (if equipped) / Anti-entrapment function. Sunshade
Anti-entrapment function
When the moonroof senses a substantial
enough object trapped between its glass
and the vehicle’s roof during closure, it
automatically moves back to the fully open
position and stops there. The anti-entrapment
function may also be activated by a
strong shock on the moonroof even when
there is nothing trapped.
CAUTION
Never attempt to test this function
using fingers, hands or other parts
of your body.
NOTE
For the sake of safety, it is recommended
that you avoid driving with the
moonroof fully opened.
Sunshade

The sunshade can be slid forward or
backward by hand while the moonroof is
closed.
If the moonroof is opened, the sunshade
also moves back.
OPEN/CLOSE switch
Open
Close
To open the moonroof:
Press the rear side of the “OPEN/CLOSE”
switch. The sunshade will also be opened
together with the moonroof. The moonroof
will stop at a position approximately 6 in
(15 cm) away from the fully opened
position. Slide the switch rearwar..
Other information:
Turn the airflow mode selection dial
and fan speed control dial to the “AUTO”
position.
Set the preferred temperature using
the temperature control dial.
NOTE
Each function can be individually set to
the “AUTO” mode independently of the
other functions...
Promptly wipe the alloy wheels clean of
any kind of grime or agent. If dirt is left on
too long, it may be difficult to clean off.
Do not use soap containing grit to clean
the wheels. Be sure to use a neutral
cleaning agent, and later rinse thoroughly
with water...