Subaru Forester 2019-2026 Owners Manual / Maintenance and service / Spark plugs
Subaru Forester: Maintenance and service / Spark plugs
It may be difficult to replace the spark plugs. It is recommended that you have the spark plugs replaced by your SUBARU dealer.
The spark plugs should be replaced according to the maintenance schedule in the “Warranty and Maintenance Booklet”.
CAUTION
Make sure the cables are replaced in the correct order.
Recommended spark plugs
For the recommended spark plugs, refer to “Electrical system”.
Drive belts
It is unnecessary to check the deflection of
the drive belt periodically because your
engine is equipped with an automatic belt
tension adjuster. However, replacement of
the belt should be done according to the
maintenance schedule in the “Warranty
and Maintenance Booklet”...
Other information:
Subaru Forester 2019-2026 Owners Manual: How to use the high beam assist function
The high beam assist function will be activated when all the following conditions are met. The light control switch is in the “AUTO” position and the low beam headlights are on automatically. The turn signal lever is pushed forward. High beam assist indicator light When the high beam assist function is activated, the high beam assist indicator light on the combination meter will illuminate...
Subaru Forester 2019-2026 Owners Manual: Operating conditions
The BSD/RCTA will operate when all of the following conditions are met. The ignition switch is in the “ON” position. The BSD/RCTA warning light and BSD/ RCTA OFF indicator light are turned off. The EyeSight warning indicator is off. The vehicle is driven at speeds above 7 mph (12 km/h) (except when reversing)...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- To activate/deactivate the X-MODE
- Auto Start Stop warning light/Auto Start Stop OFF indicator light (yellow)
- Alarm system setting
- New on site
- Most important about car
Driving information display
NOTE
You can set the units for both the multifunction display (black and white) and the combination meter at the same time. For details about setting the language and units, refer to “Type A combination meter” or “Menu screens”.
Copyright © 2026 www.suforester5.com