Subaru Forester: SRS airbag (Supplemental Restraint System airbag) / Precautions against vehicle modification
WARNING
CAUTION
Do not perform any of the following
modifications. Such modifications
can interfere with proper operation
of the SRS airbag system.
- Attachment of any equipment
(bush bar, winches, snow plow,
skid plate, etc.) other than genuine
SUBARU accessory parts to
the front end.
- Modification of the suspension
system or front end structure.
- Installation of a tire of different
size and construction from the
tires specified on the vehicle
placard attached to the driver’s
door pillar or specified for individual
vehicle models in this Owner’s
Manual.
- Attachment of any equipment
(side steps or side sill protectors,
etc.) other than genuine SUBARU
accessory parts to the side body.
Always consult your SUBARU dealer if you
want to install any accessory parts on your
vehicle.
Changing or moving any parts of the front
seats, rear seat, seatbelts, front bumper,
front side frame, radiator panel, instrument
panel, combination meter, steering wheel,
steering column, tire, suspension or floor
panel can affect the operation of the
SUBARU advanced airbag system...
Other information:
The light illuminates when the Vehicle
Dynamics Control OFF switch is pressed
or turned to deactivate the Vehicle Dynamics
Control system.
The Vehicle Dynamics Control system is
probably malfunctioning under any of the
following conditions. Have your vehicle
checked at a SUBARU dealer immediately...
Adjust the seat position under the
following conditions.
The parking brake is applied.
The ignition switch is in the “ON”
position.
The select lever is in the “P” position.
Press and hold the “SET” button, then
press button “1” or “2” to register the seat
position and outside mirror angle...