Subaru Forester: Seatbelt pretensioners / Precautions against vehicle modification
Always consult your SUBARU dealer if you
want to install any accessory parts to your
vehicle.
CAUTION
Do not perform any of the following
modifications. Such modifications
can interfere with proper operation
of the seatbelt pretensioners.
- Attachment of any equipment
(bush bar, winches, snow plow,
skid plate, etc.) other than genuine
SUBARU accessory parts to
the front end.
- Modification of the suspension
system or front end structure.
- Installation of a tire of different
size and construction from the
tires specified on the vehicle
placard attached to the driver’s
door pillar or specified for individual
vehicle models in this Owner’s
Manual.
This function prompts the driver to confirm
the presence of passengers and cargo in
the rear.
This function will be activated when the
rear doors are opened and closed...
Other information:
The welcome lighting function turns on the
low beam headlight for smooth approaching
to or exiting from the vehicle at night or
in a dark place.
The function is activated while all of the
following conditions are met.
The light control switch is in the “AUTO”
position...
Apply a flat-head screwdriver to the
light cover as shown in the illustration, and
pry the light cover off from the rear gate
trim.
Turn the bulb socket counterclockwise
and remove it.
Pull the bulb out of the bulb socket and
replace it.
Install the bulb socket by turning it
clockwise...