Subaru Forester 2019-2025 Owners Manual / Driving tips / Winter driving / Driving on snowy and icy roads / Lighting operation when snowing
Subaru Forester: Driving on snowy and icy roads / Lighting operation when snowing
Check that the headlights are clean before driving. If snow, frost or ice are attached to the headlights, remove it.
If the headlights are not clean, they will not light the front normally. Also if the indicators and brake lamps are not clean, the vehicle will not be able to inform its status to other drivers and it may result in an accident.
Snow tires
WARNING
When replacing or installing winter
tire(s), all four tires must be
the same for following items.
Size
Speed symbol
Load index
Circumference
Construction
Manufacturer
Brand (tread pattern)
Degrees of wear
For the items (a) to (c), you must
obey the specification th..
Other information:
Subaru Forester 2019-2025 Owners Manual: Operating ranges
Antennas Operating range (approximately 16 to 32 in (40 to 80 cm)) LED indicator When the access key fob is within either of the operating ranges of the front doors, the LED indicator on the access key fob flashes. When the keyless access functions are disabled, the LED indicator does not flash unless a button on the access key fob is pressed...
Subaru Forester 2019-2025 Owners Manual: New vehicle break-in driving – the first 1,000 miles (1,600 km)
The performance and long life of your vehicle are dependent on how you handle and care for your vehicle while it is new. Follow these instructions during the first 1,000 miles (1,600 km): Do not race the engine. And do not allow engine speed to exceed 4,000 rpm except in an emergency...
Categories
- Manuals Home
- Subaru Forester Owners Manual
- Subaru Forester Service Manual
- RAB warning light (if equipped)
- Unlock using PIN Code Access
- If the passenger’s frontal airbag OFF indicator illuminates and the ON indicator turns off even when the front passenger’s seat is occupied by an adult
- New on site
- Most important about car
Average vehicle speed
This display shows the average vehicle speed since the trip meter was last reset. Pressing the TRIP RESET switch toggles the display between the average vehicle speed corresponding to the A trip meter display and the average vehicle speed corresponding to the B trip meter display. When either of the trip meter displays is reset, the corresponding average vehicle speed value is also reset.
Copyright © 2025 www.suforester5.com