Subaru Forester: Instruments and controls / Clock
For models with a SUBARU genuine
navigation and/or audio system, the clock
can be adjusted using either auto mode or
manual mode.
- Auto mode: automatic clock adjustment
- Manual mode: manual clock adjustment
CAUTION
The clock in the multi-function display
(color LCD) cannot be adjusted,
if the SUBARU genuine navigation
and/or audio system is removed.
Other information:
The Direct Oncoming function of Forward Collision-Avoidance Assist helps monitor vehicles approaching from the opposite direction. In the Kia Telluride, this function may respond through the following operating stages:
Collision Warning
Emergency Braking
Stopping vehicle and ending brake control
Collision Warning
Collision Warning
Collision Warning can alert the driver with a blinking Forward Safety warning light (), a warning message, an audible warning, and steering wheel vibration when the system identifies a possible direct oncoming collision...
When the driver’s door is opened and
closed after unlocking the door, the welcome
screen (opening animation) will
appear on the combination meter display
(color LCD) for approximately 20 seconds.
When the ignition switch is turned to the
“LOCK”/“OFF” position, the combination
meter display (color LCD) gradually turns
off by showing Good-bye screen (ending
animation)...